Crane Camshaft Specification Card

 Part Number: 529621
Grind Number: HR-214/325-2S-12 RF
Engine Ident: 1970-1982 FORD-MERCURY V-8 BOSS 351-351C-
  351M-400 CU.IN.
 
VALVE SETTING: INTAKE .000 EXHAUST .000 ----> HOT
LIFT: INTAKE @CAM 325 @VALVE 562 ROCKER ARM RATIO
EXHAUST @CAM 339 @VALVE 586 1.73
ALL LIFTS ARE BASED ON ZERO LASH AND THEORETICAL ROCKER ARM RATIOS
CAM TIMING OPENS CLOSES ADV DURATION
      @ .0040 INTAKE 27 BTDC 69 ABDC 276
TAPPET LIFT EXHAUST 75 BBDC 29 ATDC 284
SPRING REQUIREMENTS
TRIPLE      DUAL       OUTER      INNER
PART NUMBER
          99890                   

LOADS:

CLOSED  132 LBS  @ 1.875 OR 1 7/8
OPEN  364 LBS  @ 1.315
RECOMMENDED RPM
RANGE WITH MATCHING COMPONENTS
MINIMUM RPM 2000
MAXIMUM RPM 5500
VALVE FLOAT 6500
CAM TIMING OPENS CLOSES MAX LIFT DURATION
      @ .050 INTAKE 0 BTDC 34 ABDC 107 ATDC 214
TAPPET LIFT EXHAUST 48 BBDC (6) BTDC 117 BTDC 222
REMARKS:
  FOR ENGINES NOT ORIGINALLY EQUIPPED WITH
  HYD. ROLLER CAMSHAFTS. REQUIRES 44306-1 HYD.
  ROLLER CONVERSION KIT. MUST USE A CRANE BRONZE
  OR CRANE STEEL DISTRIBUTOR GEAR TO PREVENT WEAR.
 

 Crane Cams continuously improves and upgrades its cam designs. In some cases this may mean that two Crane Cams with the same part number may actually be different grinds. You must check the GRIND NUMBER stamped on the front of the camshaft and check it against the Grind Number near the top of the Spec Card. Need help reading your Spec Card?  For more information on the finest available camshafts, valve train components, and automotive ignition products, visit your local Crane dealer or call the Crane Cams tech line at (904) 258-6174 or FAX (904) 258-6167.

Contact Information
Address: Crane Cams, Inc.
Dept WWW
530 Fentress Blvd.
Daytona Beach, FL  32114
Copyright 1997 Crane Cams, Inc.
Last modified: April 05, 1999